The Foamaster Foam Wash Gun is an essential tool for achieving a swirl-free car wash, delivering a thick layer of foam to provide maximum lubrication for your vehicle’s paint. With brass fittings and a durable red and black nozzle, the Foamaster reduces the need for excessive scrubbing by pre-soaking the vehicle in rich, frothy foam, making dirt and debris easier to remove with minimal agitation. This technique helps prevent micro-marring and ensures a gentle, safe wash. The Foamaster is known for creating a substantial amount of foam that clings to the vehicle longer than soap applied by hand, thanks to its higher dilution ratio. Many detailers use the Foamaster both as a pre-soak and during the wash, spraying foam directly in the path of a mitt for optimal lubrication. Constructed from high-quality materials like brass and chemical-resistant polyethylene, the Foamaster is designed for durability and long-lasting performance, making it a favorite among detailers and car enthusiasts.

The Foamaster is available in two sizes:

75QCFMR – Quart Foam Gun w/ multi-ratio stem and deflector.
75HGFMR – Half Gallon Foam Gun w/ multi-ratio stem and deflector.

Multi-ratio Stem – The multi-ratio stem gives you five settings so you can adjust the dilution ratio of your shampoo. The chart below shows you the shampoo (oz.) to water (gal.) ratio based on the position of the stem.

Deflector – This piece can be used instead of the foam nozzle to deflect exiting water downward and into a wider path. This piece is best suited for spraying non-foaming cleaners over a broad area.